|
S-1608 Stage Unit
|
|
|
|
| Number of Channels |
16 in 8 out |
| AD Conversion |
Sample Rate: 96.0 kHz
Signal Processing: 24 bits |
| DA Conversion |
Sample Rate: 96.0 kHz
Signal Processing: 24 bits |
| Frequency Response |
-2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz) |
| Total Harmonic Distortion + Noise |
0.05 % or less (Pad: On, Input Gain: +4 dBu, 22 to 20000 Hz) |
| Dynamic Range |
110 dB |
| Nominal Input Level |
-65 to -10 dBu (PAD: Off)
-45 to +10 dBu (PAD: On)
(1 dB step, Max. +28 dBu) |
| PAD |
20 dB On/Off |
| Input Impedance |
14 k ohms |
| Nominal Output Level |
+4 dBu, Max. +22 dBu |
| Output Impedance |
600 ohms |
| Recommended Load Impedance |
10 k ohms or greater |
| Residual Noise Level (IHF-A, typ.) |
-80 dBu or less |
| Equivalent Input Noise Level (E.I.N.) |
-128 dB |
| Network Latency |
375 microseconds when using REAC cable only (AD - REAC - DA Latency: about 1.2 ms) |
| Connectors |
Input x 16 (XLR type, balanced, phantom power)
Output x 8 (XLR type, balanced)
REAC Connector x 1 (RJ-45 EtherCon type)
Remote Connector x 1 (RS-232C, DB-9 type) |
| Indicators |
POWER Indicator x 1
REAC Indicator x 1
REMOTE Indicator x 1
MUTE ALL OUTPUTS Indicator x 1 |
| Power Supply |
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz) |
| Phantom Power |
+48 V / 14 mA (each input, remote controlled) |
| Dimensions |
399.0 (W) x 135.0 (D) x 177.0 (H) mm |
| Weight |
4.5 kg |
| Operation Temperature |
0 to +40 degrees centigrade |
| Accessories |
Power Cord x 1
REAC Connector Covers x 1
Ferrite Cores x 1
Rubber Foot x 4
Rack Mount Kit x 1
Owner's Manual |
| Options |
Cat5e Ethernet Crossover Cable with Neutrik(R) EtherCon(R) Plug: SC-W100S (100 m) |
